Product Identification; Nameplate; Manufacturer Address; Storage And Transport - Endress+Hauser Liquiphant FTL51B Density Operating Instructions Manual

Incoming acceptance and product identification
10
4.2

Product identification

The following options are available for identification of the device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
www.endress.com/deviceviewer. All of the information on the measuring device is
displayed along with an overview of the scope of technical documentation provided.
• Enter the serial number on the nameplate into the Endress+Hauser Operations app or
scan the 2-D matrix code on the nameplate with the Endress+Hauser Operations app
4.2.1

Nameplate

The information that is required by law and is relevant to the device is shown on the
nameplate, e.g.:
• Manufacturer identification
• Order number, extended order code, serial number
• Technical data, degree of protection
• Firmware version, hardware version
• Approval-related information, reference to Safety Instructions (XA)
• DataMatrix code (information about the device)
4.2.2

Manufacturer address

Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
4.3

Storage and transport

4.3.1

Storage conditions

Use original packaging.
Storage temperature
–40 to +80 °C (–40 to +176 °F)
Transporting the device
• Transport the device to the measuring point in the original packaging
• Hold the device by the housing, temperature spacer, process connection or extension
pipe
• Do not bend, shorten or extend the tuning fork
 2 Handling the device during transport
Liquiphant FTL51B Density
A0034846
Endress+Hauser