Certificates And Approvals; Storage And Transport; Mounting; Installation Conditions - Endress+Hauser RIA15 Operating Instructions Manual

Mounting

8
3.2.2 Name and address of manufacturer
Name of manufacturer:
Address of manufacturer:
3.3

Certificates and approvals

For certificates and approvals valid for the device: see the data on the nameplate
Approval-related data and documents:
serial number)
3.4

Storage and transport

Note the following:
The permitted storage temperature is –40 to 85 °C (–40 to 185 °F); it is possible to store
the device at borderline temperatures for a limited period (48 hours maximum).
Pack the device for storage and transportation in such a way that it is reliably
protected against impact and external influences. The original packaging offers the
best protection.
Avoid the following environmental influences during storage and transport:
• Direct sunlight
• Vibration
• Aggressive media
4 Mounting
4.1

Installation conditions

Permitted ambient temperature: –40 to 60 °C (–40 to 140 °F)
At temperatures below –25 °C (–13 °F) the readability of the display can no longer be
guaranteed.
4.2

Installation Instructions

For device dimensions, see "Technical data".
4.2.1 Panel housing
• Degree of protection: IP65 front, IP20 rear (not evaluated by UL)
• Mounting position: horizontal
Endress+Hauser Wetzer GmbH + Co. KG
Obere Wank 1, D-87484 Nesselwang or
www.endress.com/deviceviewer
RIA15
www.endress.com
→ (enter the
Endress+Hauser