Maintenance
•
Fit the pin for aligning the intake cam-
shaft with the hole in the bearing cap.
Specific tooling
020851Y Camshaft timing pin
•
Loosen the second screw of the cam-
shaft drive sprocket.
•
Remove the pin from the camshaft
drive sprocket.
•
Unscrew and remove the three screws
(1) and remove the bearing cap (2) and
the oil pipe (3).
•
Remove the second screw of the cam-
shaft drive sprocket.
CAUTION
WORK WITH PARTICULAR CAUTION TO PREVENT THE
CAMSHAFT GEAR FROM DETACHING FROM THE CAM-
SHAFT.
MAIN - 92
RSV4 1100 Factory