Advertisement
RSV4 1100 Factory
•
Remove the engine support and insert
the rear bank manifolds equipped with
new gaskets.
•
Insert the locking nuts and screw them
partially to facilitate the subsequent op-
erations for the assembly of the ex-
haust system.
•
Fit the central manifold by connecting
the rear manifolds, making sure to
pass the rear bank lambda probe wir-
ing harness inside the metal cable
gland.
•
Connect the springs that hold the rear
manifolds joined with the central mani-
fold.
•
Place the engine spacer on the left side
of the vehicle and secure it by tighten-
ing the four screws to the specified
torque.
Engine from vehicle
ENG VE - 201
Advertisement
