RSV4 1100 Factory
•
When the connector is fully inserted,
the distance between the connector
and the ABS control unit must be 7.5
mm (0.29 in).
•
If the initial position of the connector
and the driving lever is not that shown
in fig. 1, the connector will not be prop-
erly coupled and the distance meas-
ured will be greater (12 mm approx.
(0.47 in)). In this case repeat the oper-
ation as described in the two previous
points.
WE RECOMMEND CREATING A TEMPLATE IN
ORDER TO ENSURE THAT THE CONNECTOR
IS INSERTED CORRECTLY.
Braking system
BRAK SYS - 433