APRILIA RSV4 1100 Factory 2021 Manual page 459

RSV4 1100 Factory
•
Unscrew and remove the two external
pump cover fixing screws.
•
Unscrew and remove the inner screw.
•
Remove the pump cover.
TO PREVENT IRREPARABLE DAMAGE TO THE PUMP,
UNSCREW AND REMOVE THE INNER SCREW BEFORE
REMOVING THE COVER.
•
At each removal, replace the inner gas-
ket between the pump casing and the
cover and the O ring on the pump cas-
ing.
ENSURE THAT THE LIQUID PASSAGE ORIFICES ARE
NOT OBSTRUCTED.
Removing the radiator
In order to carry out the procedure described below, the side fairings, the inner side fairings, the lower
fairings and the chin fairing must be removed beforehand. Then proceed as described:
Cooling system
COOL SYS - 459