APRILIA RSV4 1100 Factory 2021 Manual page 365

RSV4 1100 Factory
•
Pour the remaining oil.
•
Pump out oil a few times.
•
Measure the air gap between the oil level and the rim.
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER TO MEASURE THE CORRECT OIL
LEVEL. THE OIL LEVEL MUST BE THE SAME IN BOTH STANCHIONS.
Oil level: 110 +/- 2 mm (4.33 +/- 0.08 in) (from
edge of sleeve, without spring and without pre-
fill pipe).
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER
TO MEASURE THE CORRECT OIL LEVEL. THE OIL LEVEL
MUST BE THE SAME IN BOTH STANCHIONS.
Characteristic
Fork oil
427 +/- 5 cc (26.06 +/- 0.30 cu in) (for each shaft)
•
Insert the spring.
CAUTION
PROCEED WITH CAUTION WHEN INSERTING THE
SPRING AND ENSURE THAT THE PART WHERE THE SPI-
RAL IS MORE COMPRESSED IS FACING DOWNWARDS.
•
Insert the spring guide and lock it in place using the respective snap ring.
•
Position the forks vertically.
•
Insert the base washer.
Suspensions
SUSP - 365