Advertisement
RSV4 1100 Factory
•
Cruise control / - (indicates the cruise control status)
•
Front brake lev. qual. swit. / - (front brake lever qualified switch)
•
Rear brake lev. qual. swit. / - (rear brake lever qualified switch)
•
Front brake lev. "raw" swit. / - (front brake lever "raw" switch)
•
Rear brake lev. "raw" swit. / - (rear brake lever "raw" switch)
•
Front brake lev. swit. / - (front brake lever switch)
•
Rear brake lev. swit. / - (rear brake lever switch)
•
Cruise ON-OFF button / - (indicates the status of the button relating to cruise control on the
handlebar)
•
Cruise control SET + / -
•
Cruise control SET - / -
•
Rear coil 1 / - (rear bank coil 1)
•
Front coil 2 / - (front bank coil 2)
•
Rear coil 3 / - (rear bank coil 3)
•
Front coil 4 / - (front bank coil)
•
Fuel pump / -
•
Rev counter / -
•
Rear lambda 1 heat. / - (rear bank lambda probe 1 heater)
•
Rear cyl. 1 low. inj. / - (rear bank cylinder 1 lower injector)
•
Front cyl. 2 low. inj. / - (front bank cylinder 2 lower injector)
•
Rear cyl. 3 low. inj. / - (rear bank cylinder 3 lower injector)
•
Front cyl. 4 low. inj. / - (front bank cylinder 4 lower injector)
•
Rear cyl. 1 upp. inj. / - (rear bank cylinder 1 upper injector)
•
Front cyl. 2 upp. inj. / - (front bank cylinder 2 upper injector)
•
Rear cyl. 3 upp. inj. / - (rear bank cylinder 3 upper injector)
•
Front cyl. 4 upp. inj. / - (front bank cylinder 4 upper injector)
•
Fan
•
Front lambda 2 heat. / - (front bank lambda probe 2 heater)
•
Secondary air valve / - (secondary air solenoid valve activation)
•
Stop light
DIAGNOSTIC TOOL: ELECTRICAL ERRORS
P0601 EEPROM error
Electrical diagnostic:
•
Circuit not functioning
Error cause:
•
Replace the injection control unit.
The instrument cluster indicates the presence of this error with the MI warning light on fixed.
Electrical system
ELE SYS - 165
Advertisement
