APRILIA RSV4 1100 Factory 2021 Manual page 133

RSV4 1100 Factory
TABLE L2 - EXHAUST VALVE MOTOR AREA
WIRING HARNESSES
•
The electric fan wiring harness must be
secured to the ride by wire wiring har-
ness with a clamp, at the indicated
point.
•
Check that the grey safety lock on the
ride by wire connector is secured in the
lowered position.
TABLE M - RIDE BY WIRE HANDLE CABLE
ROUTING
•
The ride by wire handle cable must
pass over the main wiring harness
branch that goes to the instrument pan-
el and under the radiator pipe that con-
nects the thermostatic valve with the
radiator.
1 Ride by wire handle wiring harness.
2 Radiator pipe
3 Main wiring harness
IF THIS CABLE IS NOT ROUTED CORRECTLY,
IT MAY DAMAGE THE RIDE BY WIRE HANDLE.
Electrical system
ELE SYS - 133