Advertisement
RSV4 1100 Factory
TABLE F1 - ENGINE OIL PRESSURE SENSOR
CONNECTION
•
After bending the cap stem by 180 de-
grees, place a clamp as indicated.
TABLE G - GROUND LEADS
•
The battery-engine ground wiring har-
ness must not be visible in the area
indicated by the red triangle symbol.
TABLE G1 - GROUND LEADS
1. Main wiring harness ground lead.
2. Engine-battery earth cable
3. Engine wiring harness ground lead
•
The ground wiring harnesses must
converge at the fixing point on the en-
gine.
•
All wiring harnesses on the left side of
the vehicle must pass inside the cable
gland on the chassis at the indicated
point.
Electrical system
ELE SYS - 127
Advertisement
