Advertisement
Electrical system
TABLE I - STARTER MOTOR WIRING HAR-
NESS
•
IF THE RELAY-STARTER MOTOR IS
NOT ROUTED OR SECURED COR-
RECTLY IT MAY CAUSE THE VEHI-
CLE CATCH FIRE. CHECK THAT
THE CABLE ON THE STARTER MO-
TOR IS PLACED AS INDICATED.
•
COVER THE STARTER MOTOR NUT
AND THE SQUARE TERMINAL WITH
DIELECTRIC, WATER-REPELLENT
GREASE.
TABLE J - RADIATOR FAN PRE-FITTING
•
The assembly is correct if the fan ca-
bles from the fan motor exits down-
ward, as indicated
TABLE K - VOLTAGE REGULATOR
•
Insert the pick up connector in the spe-
cific tab on the internal fairing and after
having connected the voltage regulator
connectors, secure the voltage regula-
tor and pick-up wiring harnesses using
two clamps.
•
Leave the circled area free.
ELE SYS - 130
RSV4 1100 Factory
Advertisement
