Advertisement
RSV4 1100 Factory
•
Unscrew and remove the engine oil
dipstick.
•
Unscrew and remove the five special
screws (3) and the eleven fastening
screws (4) around the perimeter, and
retrieve the relative washers.
•
Remove the clutch crankcase.
•
Remove the gasket, the two alignment pins and the starter idler gear
Disassembling the clutch
•
Remove the clutch cover.
•
Unscrew and remove the six screws,
loosening them by a quarter of a turn
at a time, by stages, and working in a
diagonal fashion, while recovering the
washers and the clutch springs.
Engine
ENG - 243
Advertisement
