APRILIA RSV4 1100 Factory 2021 Manual page 485

RSV4 1100 Factory
Lower cowl
To remove the lower fairings, follow the procedure
described below:
•
Remove the lower screw fastening the
fairings to the metal bracket.
•
While supporting the weight of the low-
er fairings, remove the lateral fastener
screws on both sides.
•
Slowly lower the lower fairings, pulling
out the breather pipe at both the front
and the rear.
•
Remove the three screws fastening the left hand half of the lower fairings to the right hand
half to separate the halves.
To remove the chin fairing, follow the procedure
described below:
•
Remove the screws fastening the chin
fairing to the inner lateral fairings on
both sides.
Bodywork
BODYW - 485