Advertisement
Chassis
•
Detach the rear brake calliper com-
plete with mount from the pin on the
inner side of the swingarm, and move
it out of the way laterally to facilitate re-
moval of the swingarm.
•
Unscrew the three fastener screws of
the front sprocket cover and remove
the cover.
•
Unscrew and remove the fastener
screw of the front sprocket complete
with the "T" bush and the cup spring
washer.
•
Detach the front sprocket from the sec-
ondary shaft, freeing if from the final
drive chain.
•
Remove the nut with the screw fasten-
ing the dual linkage to the swingarm.
CHAS - 398
RSV4 1100 Factory
Advertisement
