APRILIA RSV4 1100 Factory 2021 Manual page 479

RSV4 1100 Factory
•
Separate the winglet (14) from the out-
er part (15) of the side fairing.
•
To separate the inner part of the wing-
let from the outer part, remove the
screw (16).
•
Detach the inner part (17) of the winglet
from the outer part (18) to separate the
two parts.
Fairing mounting panels
In order to remove the under-fairings, the lower
fairings, chin fairing and side fairings must be re-
moved beforehand. Then proceed as described:
LEFT HAND UNDER-FAIRING
•
Remove the cable tie (1) fastening the
wiring harnesses of the voltage regu-
lator and the pickup.
Bodywork
BODYW - 479