APRILIA RSV4 1100 Factory 2021 Manual page 86

Maintenance
•
Position cylinder 1 piston (LH, rear pis-
ton) so that it is at the point where it
crosses TDC.
•
Unscrew and remove the first screw of
the camshaft drive sprocket.
•
rotate the crankshaft 150° in the engine
rotation direction (direction of travel).
•
Insert the pin from the flywheel side in-
to the hole in the crankshaft.
Specific tooling
020852Y Crankshaft timing pin
•
Fit the pin for aligning the intake cam-
shaft with the hole in the bearing cap.
Specific tooling
020851Y Camshaft timing pin
•
Loosen the second screw of the cam-
shaft drive sprocket.
MAIN - 86
RSV4 1100 Factory