Advertisement
RSV4 1100 Factory
Specification
Wheels and tyres
Specification
Front wheel
Rear wheel
Specification
Front tire
Inflation pressure
Rear tire
Inflation pressure
Supply
Specification
Specification
Throttle body diameter
Tightening Torques
If the following tables do not expressly indicate the tightening torque values, refer to the table with the
generic torque values indicated below.
Tightening torque:
Tightening torque:
Rear
W
P
OWER SUPPLY
Fuel
F
UEL SUPPLY SYSTEM
Type
S
-
ELF
TAPPING SCREW TORQUES FOR PLASTIC
M
ETRIC SCREW TIGHTENING TORQUES
M4
M5
3 Nm (2.21 lbf
5.5 Nm (4.05
ft)
lbf ft)
Desc./Quantity
(1.18 inches) and 2 pads - radial pump and brake pipe in metal
disc brake -220 mm diam. (8.66 inches), 2-piston callipers - 32
mm diam. (1.25 inches) - pump with built-in tank and metal
HEELS
Desc./Quantity
T
YRES
Desc./Quantity
120/70 ZR17 (58W)
1 passenger: 2.3 bar (230 KPa) (33.36 PSI)
2 passengers: 2.5 bar (250 KPa) (36.26 PSI)
190/50 ZR17 (73W)
190/55 ZR17 (75W)
200/55 ZR17 (78W) (*)
(*) For these specifications use only Pirelli Diablo Super-
corsa SP tyres.
1 passenger: 2.5 bar (250 KPa) (36.26 PSI)
2 passengers: 2.8 bar (280 KPa) (40.61 PSI)
Desc./Quantity
Unleaded gasoline E10 (95 R.O.N.)
Desc./Quantity
48 mm (1.89 in)
Electronic injection with 2 injectors per cylinder, 4 motorised
throttle bodies (Ride by wire) with fixed height air intakes dif-
ferentiated per main bearing (front/rear). 2 dynamic air intakes.
Selectable multimap.
2.9 mm
3.9 mm
1 Nm (0.73 lbf
1.5 Nm (1.10 lb
ft)
ft)
M6
M8
9.5 Nm (7.00
25 Nm (18.43
lbf ft)
lb ft)
Characteristics
braid.
braid pipe.
3.50 x 17"
6.00 x 17"
4.2 mm
4.9 mm
2 Nm (1.47 lb
2.5 Nm (1.84 lb
ft)
ft)
M10
M12
50 Nm (36.87
80 Nm (59.00
lb ft)
lb ft)
CHAR - 21
Advertisement
