Table of Contents
Advertisement
11.3
Using Stored Streamline Capture Data to create new Streamline Analysis
Reports
11.3.1
See also
ARM DUI 0482K
ID120712
You might want to use stored capture data to create new Streamline Analysis reports for the
following reasons:
•
You captured data locally and transferred the Streamline Capture Data to the host.
•
Sources were not available when the data was captured.
•
Current Streamline Analysis files have been rendered incompatible by a new version of
Streamline.
To create a new Streamline Analysis File:
1.
Open the Streamline Data view.
2.
Double-click on a stored Streamline Capture Data resource in the list.
3.
In the resulting dialog box, make the required changes to the settings.
The options here are a subset of the options available in the Capture Options dialog box
and they work the same way. Use the checkboxes of the Analysis section to toggle the
High Resolution Timeline and Process Debug Information on and off. Use the Program
Images section to add and remove images.
4.
Click Analyze.
5.
Enter a name for the new Analysis File in the resulting dialog box.
Tasks
•
Capturing data on your target on page 11-2
•
Customize reports using Annotate on page 10-2
•
Creating custom performance counters on page
Reference
•
Capture options on page 4-3
•
The Streamline Data view on page
Copyright © 2010-2012 ARM. All rights reserved.
Non-Confidential
Figure 11-2 The Analyze dialog box
11-4.
3-2.
Advanced Customizations
11-9
Advertisement
Table of Contents
