Table of Contents
Advertisement
4.2
Capture options
4.2.1
Connection and Capture settings
ARM DUI 0482K
ID120712
The Capture Options dialog box presents various options that you can use to customize a capture
session.
The Connection and Capture sections contains the following settings:
Address
The network address of the target. You can also enter the network name of your
target here. The value given in this field overwrites the value in the Address field
of the Streamline Data view, if one has been given. The reverse is also true. If you
enter a new address in the Address field of the Streamline data view, it replaces
the value entered here.
Note
By default, Streamline uses port 8080 to connect to a target. To use a different
port, specify one here by entering a colon and a port number after the IP address.
For example, enter
Note
If you use the port forwarding of ADB with USB, enter
field.
Copyright © 2010-2012 ARM. All rights reserved.
Non-Confidential
to use port 1010 to connect to the target.
Your_IP_address:1010
Setting Capture Options
Figure 4-3 Configuration options
in the Address
localhost
4-3
Advertisement
Table of Contents
