Table of Contents
Advertisement
2.2.6
Set capture options to support your Android target
2.2.7
See also
ARM DUI 0482K
ID120712
-m
If
is located in a different directory than gatord, use the
gator.ko
define the location of
-p
Sets the port number that
-s
Defines the location of the session.xml file. Include the directory location and the
file name. This option is most useful when performing a local capture. For more
information, see
-o
Useful when performing a local capture, use this option to define the location of
the apc directory.
-v
Displays the version information for
Note
To unload the gator daemon, determine the process id of gatord using ps -d | grep gatord and
enter the kill command: kill process_id.
By default,
uses port 8080 for communication with the host, but you can adjust this by
gatord
launching
with the port number as a parameter and changing the Port option in the
gatord
Capture Options dialog box. For example:
./gatord 5050 &
To open the Capture Options dialog box, click Change capture options in the Streamline Data
view.
In the Capture Options dialog box, opened in the Streamline Data view in Eclipse for DS-5 and
enter the ethernet address. If you use the ADB to forward the port, enter
Address field.
Note
With Android, make sure to add the shared libraries you are interested in profiling to the session
using the Program Images section of the Capture Options dialog box.
Tasks
•
Opening the Capture Options dialog box on page 4-2
•
Setting up an ARM Linux target on page
Reference
•
Target connection issues on page 14-2
•
Capture options on page 4-3
•
The Streamline Data view on page
Copyright © 2010-2012 ARM. All rights reserved.
Non-Confidential
.
gator.ko
uses to communicate with the host.
gatord
Capturing data on your target on page
gatord
2-2.
3-2.
Setting Up Your Target
option to
-m
11-2.
.
in the
Localhost
2-9
Advertisement
Table of Contents
