Table of Contents
Advertisement
Technical data
Ex approval
CE mark
C-tick mark
Other standards and
guidelines
66
10.1.12 Certificates and approvals
Information about currently available Ex versions (FM, CSA) can be supplied by your
Endress+Hauser Sales Center on request. All explosion protection data are given in a separate
documentation which is available upon request.
The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
The measuring system meets the EMC requirements of the Australian Communication and Media
Authority (ACMA).
• EN 60529:
Degrees of protection by housing (IP code).
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
• IEC/EN 61326
"Emission in accordance with requirements for Class A". Electromagnetic compatibility
(EMC requirements)
• ANSI/ISA-61010-1 (82.02.01)
Safety Standard for Electrical and Electronic Test, Measuring, Controlling and related Equipment
- General Requirements. Pollution degree 2.
• CAN/CSA-C22.2 No. 1010.1-92
Safety requirements for Electrical Equipment for Measurement and Control and Laboratory Use.
Pollution degree 2, Installation Category II
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics.
10.1.13 Ordering information
Your Endress+Hauser service organization can provide detailed ordering information and
information on the order codes on request.
10.1.14 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor → ä 46.
Your Endress+Hauser service organization can provide detailed information on the order codes in
question.
10.1.15 Documentation
• Flow Measurement (FA005D/06)
• Technical Information Prosonic Flow 91W (TI105D/06)
• Supplementary documentation on Ex-ratings: ATEX, FM, CSA
Proline Prosonic Flow 91
Endress+Hauser
Advertisement
Table of Contents
