Endress+Hauser Proline Prosonic Flow 91 Operating Instructions Manual page 94

Description of device functions
94
Functional description CONFIG. CHANNEL
POSITION SENSOR Use this function to view the position of both sensors on the rail.
Display:
4-digit number combination
!
This function is only available if the number of traverses is 2 or 4 (see function SENSOR
CONFIGURATION).
WIRE LENGTH The wire length for assembling the sensors at the correct distance apart appears on the
display.
Display:
max. 4-digit number, including unit (e.g. 200 mm)
!
This function is only available if the number of traverses is 1 (see function SENSOR
CONFIGURATION).
SENSOR DISTANCE The distance between sensor 1 and sensor 2 appears on the display.
Display:
max. 5-digit number, including unit (e.g. 200 mm)
!
2 traverses cannot be used if the sensor distance is <180 mm.
Note!
Note!
Note!
Proline Prosonic Flow 91
Endress+Hauser