Commissioning - Endress+Hauser Proline Prosonic Flow 91 Operating Instructions Manual

Proline Prosonic Flow 91
Endress+Hauser
"Clamp-on" sensor installation
Procedure
Selection - Input - display
Cable length
Display sensor position
(for sensor installation)
Display wire length
(for sensor installation)
Display sensor distance
(for sensor installation)
!
Note!
A detailed description of all the functions can be found on → ä 67
6.3.2

Commissioning

Additionally to the settings for the sensor installation (→ ä 40) the following functions have to be
configured for the standard application:
• System units
• Outputs
Local display (Sensor Setup)
▼
CABLE LENGTH
POSITION SENSOR
WIRE LENGTH
SENSOR DISTANCE
Commissioning
41