Table of Contents
Advertisement
4.
5.
Configuring UPnP Settings
The Universal Plug and Play (UPnP) protocol is used to map the relationship between the LAN
and the WAN.
To configure UPnP settings
1.
2.
• Remote Directory Enter a name for the remote directory. If this is left blank, the NVR will
automatically create folder names.
• File Length
This is the maximum size for image files being uploaded to the FTP
server. Enter a value between 0 and 65535 MB.
• Image Upload
This is the interval for uploading images to the FTP server. Enter a time
Interval
between 0 and 3600 seconds.
• Channel
Select a channel to upload images from, or select All to select all
channels.
• Weekday
Select a day of the week to upload images on, or select All to upload
images every day.
• Time Periods
You can configure up to two time periods for uploading images. For
each period, select either Alarm, Motion, or Regular images.
Click Apply to save your settings. To test the FTP connection, click Test.
If you want to save your settings and exit the SETTING menu, click OK.
In the SETTING field in the Main Menu, go to NETWORK > UPnP.
Figure 7-10
Network UPnP Settings Window
On the UPnP page, configure the following settings:
• Enable
Click to enable or disable UPnP.
• LAN IP
Enter the NVR's IP address from the TCP/IP page.
Configuring Network Settings | 95
800-21090V2 - A - 03/2016
Hide quick links:
Advertisement
Table of Contents
