126 | Performance Series Full PoE Network Video Recorder User Guide
2.
3.
4.
www.honeywell.com/security
Figure 10-1
General Configuration Tab
On the General tab, configure the following settings:
• Device Name
Enter a device name for the NVR.
• Device No.
Enter a device number for the NVR.
• Language
Set the language of the user interface.
• Video Standard
Set the video standard to NTSC or PAL.
• HDD Full
Set to Overwrite to continue recording when the HDD is full. Set to
Stop Record to stop recording when the HDD is full. The default
setting is Overwrite.
• Pack Duration
Set the recording duration. Specify a time between 1 and 60 minutes.
The default setting is 60 min.
• Realtime Play
Set the length of time to play back video using the realtime playback
function in live view mode. Specify a time between 5 and 60 minutes.
The default setting is 5 min.
• Auto Logout
Set the length of time the NVR waits before logging out an inactive
user. Specify a time between 0 and 60 minutes. The default setting
is 10 min.
• Navigation Bar
Select the check box to display the live view toolbar on the live view
screen. Clear the check box to hide the live view toolbar.
• Startup Wizard
Select the check box to display the Startup Wizard at startup. Clear
the check box to bypass the Startup Wizard at startup.
• Mouse
Set the desired mouse speed using the slider.
Sensitivity
Click Apply to save your settings.
If you want to save your settings and exit the SETTING menu, click Save.