Configuring Date And Time Settings - Honeywell HEN04112 User Manual

Configuring Date and Time Settings

To configure the system time settings
1.
2.
3.
4.
To configure the Daylight Saving Time (DST) settings
1.
2.
3.
Go to Main Menu > SETTING > SYSTEM > GENERAL > Date&Time.
Figure 10-2 Date and Time Configuration Tab
On the Date&Time tab, configure the following settings:
• Date Format Select the date format that you want to use for the system time:
YYYY MM DD, MM DD YYYY, or DD MM YYYY.
• Time Format Select the time format that you want to use for the system time:
24-Hour or 12-Hour.
• Date Separator Select the separator that you want to use for the system time:
period (.), hyphen (-), or forward slash (/).
• System Time Enter the system time and time zone, and then click Save.
Click Apply to save your settings.
If you want to save your settings and exit the SETTING menu, click Save.
Go to Main Menu > SETTING > SYSTEM > GENERAL > Date&Time.
On the Date&Time tab, click to select the DST check box.
Specify when Daylight Saving Time begins and ends.
For example:
a. Since the specific dates change every year, select Date as the DST Type.
b. Set the Start Time as Mar 2nd Su 02:00 (the second Sunday in March at 2:00 a.m.).
Configuring System Settings | 127
800-21090V2 - A - 03/2016