Configuring Live View
Setting the Screen Layout
The live view interface is configurable as a single-channel or multi-channel display.
To change the screen display format using the shortcut menu
1.
2.
To change the screen display format using the live view toolbar
•
To change the screen display format using the mouse
•
To move a channel to a different location in the multi-channel grid
•
Figure 3-4
Shortcut Menu
Note
Right-click anywhere on the screen to display the shortcut menu.
Point to the View you want (View 1 is a single-channel layout, the others are multi-channel
layouts), and then click the channel(s) that you want to display.
Click a screen layout button on the live view toolbar.
Rotate the mouse wheel button.
Drag the channel to a new location in the multi-channel grid.
For example, to move channel 2 to the top left position occupied by channel 1, click
channel 2, drag it to channel 1's position, then release the mouse button.
Shortcut menu for a 16-channel NVR shown.
Viewing Live Video | 51
800-21090V2 - A - 03/2016