About This Document; Overview Of Contents - Honeywell HEN04112 User Manual

About This Document

This document introduces the Honeywell Performance Series Full PoE Network Video Recorder.
It explains how to install and operate the Performance Series Full PoE Network Video Recorder.
This document is intended for installers and users.

Overview of Contents

This document contains the following chapters and appendixes:
•
•
•
•
•
•
•
•
•
Chapter 1, Introduction, describes the front and rear panel layout of the NVR, and mouse
and remote control functions.
Chapter 2, Getting Started, describes how to connect the NVR and log on to its user
interface.
Chapter 3, Viewing Live Video, describes the NVR's real-time monitoring mode and
associated NVR operations, including controlling a PTZ camera (if connected).
Chapter 4, Recording Video, describes how to manually record a video clip and how to set
up automatic recording.
Chapter 5, Playing Back Video, describes how to search for and play back recorded video
and snapshots, and how to save recorded files to an external storage device.
Chapter 6, Configuring Camera
settings, encoder settings, snapshot settings, privacy mask settings, camera name
settings, and channel type settings.
Chapter 7, Configuring Network
settings, including connection settings, email settings, FTP settings, registration settings,
and alarm center settings.
Chapter 8, Configuring Event
settings, including settings for motion detection, video loss, camera tampering, and
system events.
Chapter 9, Configuring Storage
settings, including recording settings and HDD management settings.
Settings, describes how to configure camera image
Settings, describes how to configure the NVR's network
Settings, describes how to configure the NVR's alarm
Settings, describes how to configure the NVR's storage
800-21090V2 - A - 03/2016