Recording Video
This chapter contains the following sections:
•
•
Manual Recording Settings
In live view mode, you can manually record a clip directly to a connected USB storage device.
To record a video clip in live view mode
1.
2.
3.
4.
5.
Manual Recording Settings, page 61
Automatic Recording Settings, page 62
Note
To back up recorded video to a connected USB storage device, please see
Backing Up Video and Snapshots
Connect a USB storage device (such as a USB flash drive) to one of the USB ports on the
NVR.
The Find USB device dialog box opens automatically.
Right-click to close the window.
In live view mode, move the mouse pointer to the top of the channel window to display the
camera toolbar (see
Camera Toolbar
On the camera toolbar, click the Realtime Backup button
button changes to green while the NVR is recording.
Click the Realtime Backup button again to stop recording.
The video clip is saved automatically to the connected USB storage device. The file name
uses the following format: [NVR name]_[channel]_[video stream]_[recording start
time]_[recording end time]).dav.
on page 70.
on page 48).
4
4
to start recording. The
800-21090V2 - A - 03/2016