Table of Contents
Advertisement
6.
7.
Configuring Email Settings
To configure email notifications
1.
2.
3.
Click Apply to save your settings.
If you want to save your settings and exit the SETTING menu, click OK.
In the SETTING field in the Main Menu, go to NETWORK > Email.
Figure 7-8
Network Email Settings Window
On the EMAIL page, select the Enable check box to enable email notifications for alarm
events.
Configure the following settings:
• SMTP Server
Enter the SMTP server address of the sender's email account.
• Port
The default TCP/IP port used for SMTP is 25.
• Anonymous
Select the check box to hide the sender's address in sent email.
• Username
Enter the user name of the sender's email account.
• Password
Enter the password of the sender's email account.
• Receiver
Enter the email address where you want to send the notification.
You can enter up to three email addresses.
• Sender
Enter the sender's email address.
• Title
Enter the email subject.
• Attachment
Select the check box to enable sending an attachment with the
email.
• Encrypt Type
Select an encryption type: None, SSL, or TLS.
• Event Interval
This is the interval for sending emails. Enter a time between 0 and
3600 seconds. 0 means that there is no interval.
Configuring Network Settings | 93
800-21090V2 - A - 03/2016
Hide quick links:
Advertisement
Table of Contents
