50 | Performance Series Full PoE Network Video Recorder User Guide
Live View Toolbar
If enabled, the live view toolbar appears along the bottom of the live view screen.
The toolbar is disabled by default. To enable it, right-click and go to Main Menu > SETTING >
SYSTEM > GENERAL > General and select the Navigation check box. Right-click twice to
return to the live view screen. Click anywhere on the screen to display the toolbar.
Shortcut Menu
The shortcut menu is displayed by right-clicking anywhere on the screen in live view mode.
www.honeywell.com/security
Figure 3-3
Live View Toolbar
Table 3-2
Live View Toolbar
Main Menu
Screen Layout
Tour Control
Pan/Tilt/Zoom
Camera
Search
Event
Channel Info
Remote Device
Network
HDD Manage
USB Manage
Open Main Menu.
Select screen layout format.
Enables a tour (automatically cycles through channel
views). See
Configuring Tour Settings
Open the PTZ control panel. See
Cameras
on page 52.
Open the Camera setting window. See
Device (Camera)
on page 75.
Open the playback interface. See
page 67.
Open the Event information window.
Open the Channel Info window.
Add and configure a remote device (camera). See either
Using the Startup Wizard
on page 39 or
Device (Camera)
on page 75.
Open the Network window. See
Port Settings
on page 85.
Open the HDD Manage window. See
Management Settings
on page 119.
Open the USB Manage window.
on page 130.
Controlling PTZ
Adding a Remote
Playing Back Video
on
Adding a Remote
Configuring TCP/IP and
Configuring HDD