Honeywell HEN04112 User Manual page 87

Figure 7-2 Network Port Settings Window
2. On the Connection page, you can configure the following settings:
• Max Connection
• TCP Port
• UDP Port
• HTTP Port
• HTTPS Port
• RTSP Port
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK.
Note You must restart the NVR to apply any changes to the NVR's port settings.
Ensure that the port settings do not conflict with each other.
Select a value between 0 and 20. The default setting is 20.
Select a value between 1025 and 65535. The default setting is
37777.
Select a value between 1025 and 65535. The default setting is
37778.
Select a value between 0 and 65535. The default setting is 80.
Select a value between 0 and 65535. The default setting is 443.
Select a value between 0 and 65535. The default setting is 554.
Configuring Network Settings | 87
800-21090V2 - A - 03/2016