Configuring Holiday Settings - Honeywell HEN04112 User Manual

128 | Performance Series Full PoE Network Video Recorder User Guide
4.
5.
To synchronize the system time with the Network Time Protocol (NTP)
1.
2.
3.
4.
5.
6.
7.
8.
9.

Configuring Holiday Settings

To configure holiday settings
1.
www.honeywell.com/security
c. Set the End Time as Nov 1st Su 02:00 (the first Sunday in November at 2:00 a.m.).
Click Apply to save your settings.
If you want to save your settings and exit the SETTING menu, click Save.
Ensure that the NVR is connected to the Internet.
Go to Main Menu > SETTING > SYSTEM > GENERAL > Date&Time.
On the Date&Time tab, click to select the NTP check box.
In the Server box, enter the IP address of the NTP server that you want to use (for
example, time.nist.gov).
Ensure that Port is set to 123.
To change the frequency with which the system time synchronizes with the NTP server,
enter a new time in the Update Period box. The default setting is 60 min.
Click Manual Update to manually synchronize your system time with the NTP server.
Click Apply to save your settings.
If you want to save your settings and exit the SETTING menu, click Save.
Go to Main Menu > SETTING > SYSTEM > GENERAL > Holiday Setup.
Figure 10-3 Holiday Setup Tab