Configuring Ftp Settings - Honeywell HEN04112 User Manual

94 | Performance Series Full PoE Network Video Recorder User Guide
4.
5.

Configuring FTP Settings

You can configure an FTP connection to upload image files at regular intervals to an FTP server.
To configure FTP settings
1.
2.
3.
www.honeywell.com/security
• Health Enable select the check box to enable a health check. The system sends a
test email to check the connection.
• Interval This is the interval the NVR waits before sending out email
notifications after an event is detected. Enter a time between 0 and
1440 minutes. 0 means that there is no interval.
Click Apply to save your settings.
If you want to save your settings and exit the SETTING menu, click OK.
In the SETTING field in the Main Menu, go to NETWORK > FTP Setting.
Figure 7-9 Network FTP Settings Window
On the FTP Setting page, click the Enable check box to enable uploading images to an FTP
server.
Configure the following settings:
• Server IP Enter the address of the FTP server.
• Port Enter the port of the FTP server.
• Username Enter the user name for logging on to the FTP server.
• Password Enter the password for logging on to the FTP server.
• Anonymous Select the check box to hide user name when logged on to the FTP
server.