Network Video Recorder Components - Honeywell HEN04112 User Manual

Network Video Recorder Components

For NVR specifications, please see
Component Name
Power Button
IR Receiver
Shift
Table 1-1 IP Cameras Features
Category
Network Management
Peripheral Equipment
Management
Auxiliary
Figure 1-1 NVR Front Panel
Table 1-2 NVR Front Panel Components
Icon
SHIFT
Features
• Supports NVR configuration and management through
the Ethernet.
• Supports device management through the Internet.
• Supports peripheral equipment management such as
protocol setup and port connection.
• Supports transparent data transmission such as RS232
(RS-422) and RS485 (RS-485).
• Supports switching between NTSC and PAL.
• Supports viewing real-time system resources information
and running statistics display.
• Supports log file.
• Supports local GUI output and shortcut menu operation
with a computer mouse.
• Supports IR control using shortcut menu operation with a
computer mouse.
• Supports IP camera remote video preview and control.
Appendix D on page 173.
Function
Power button. Press this button for three seconds
to boot up or shut down the NVR.
Receives the signal from the remote control.
• When the cursor is in a textbox, click this
button to switch between numbers and letters
(lower case/upper case).
• Enable/disable a tour.
Introduction | 27
800-21090V2 - A - 03/2016