Table of Contents
Advertisement
until CONFIG appears.
4. Press OK. The following appears on the display.
CONFIG
ALARMS
5. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until INSTRUMENT appears.
6. Press OK.
The following appears on the display. INSTRUMENT
SITE INFO
7. Press OK, the following appears on the display.
UNIT S/N
8. Using the UP arrow and DOWN arrow scroll through the options until SITE ID #1 appears.
9. To change the SITE ID #1, press OK and then using the keypad enter the eight-digit SITE ID.
10. SITE ID is in addition to the UNIT S/N. Follow the site-specific rules for configuring the site ID
number.
11. Once you enter all the eight digits, press OK.
5.2.4 Setting the Date and Time
Setting the Date
l
Setting the Time
l
5.2.4.1 Setting the Date
To set the date:
1. Unlock the keypad and type the PASSCODE to enter level 2 mode or level 3 mode. Refer to the
section "Accessing Level 2 Mode" for accessing level 2 mode or section "Access Level 3 Mode" for
accessing level 3 mode.
2. By default, in level 2 mode or level 3 mode the following appears on the display.
MAIN MENU
ALARMS
Honeywell
2023
5 User Access
5.2 Working with HMI
102
Advertisement
Table of Contents
