76 | Performance Series Full Poe Embedded NVR Remote User Guide
3.
4.
Configuring Local Storage
Click Storage under STORAGE to open the Local Storage configuration interface.
The Local Storage interface shows HDD information. You can also configure read-only,
read-write, redundancy (if there is more than one HDD), and format settings.
Configuring Manual Recording Storage Settings
Click Record under Storage to open the Record configuration interface.
www.honeywell.com/security
Configure the schedule, then click Save.
Table 3-18
Schedule Configurations
Configuration
Channel
Regular
Motion
Alarm
MD&Alarm
Click Save to save the settings, and then click Save to save the Schedule configuration.
Figure 3-44
Local Storage Interface
Description
Select a channel from the drop-down list.
Check to enable the Regular schedule mode.
Check to enable the Motion Detection schedule mode.
Check to enable the Alarm mode.
Check to enable the MD&Alarm mode.