Gasboy Islander Prime Instruction And Installation Manual page 95

7.4 Printer
Push and pull the cleaning card so that the printer head is cleaned.
7
Verify that the cleaning card has been removed from the printer guillotine without being
8
affected.
Verify that the cleaning card rolls out from the paper slot.
9
Pull the cleaning card gently, and repeat steps 5 to 9 with the same cleaning card now tilted to
10
the left.
11 Repeat the above several times in order to obtain the best cleaning results.
12 Stop when the cleaning card is dry.
13 Press the green paper-lock lever and insert thermal paper in the printer from the paper roll.
14 Press the green paper-lock lever back.
15 Print a receipt with at least ten rows of text.
16 Check readability and verify the text font is clear.
Note: If readability is still poor, repeat the cleaning procedure with a new cleaning card.
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Maintenance
Page 83