Table of Contents
Advertisement
7.1 General
7 – Maintenance
7.1 General
Islander Prime itself as a standalone unit should be cleaned periodically at short intervals, due
to the harsh environment of the homebase station where it operates.
7.2 OrPAY1000 and Islander Prime
The following instructions are valid for the OrPAY1000 front panel and the Islander Prime
pedestal.
• Clean the OrPAY1000 front plastic panel with a lightly moistened cloth with WD-40 or
any other similar lubricant.
• Clean the pedestal metallic enclosure using a damp cloth and cleaning spray.
CAUTION
7.3 Magnetic Card Reader
The Card Reader should be cleaned periodically, preferably once every two weeks, in order to
ensure proper operation. The purpose of cleaning is to remove any dust that may harm the
reader and consequently prevent the completion of a sale.
To clean the magnetic card reader, proceed as follows:
Remove the cleaning card from its packing.
1
Insert the cleaning card all the way in the reader, and then pull it out slowly.
2
Perform steps 1 and 2 several times until the card is dry.
3
4
Insert any magnetic card and verify that its stored data is read by the magnetic card reader.
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Caution:
• DO NOT use any solvents such as thinner or benzene.
• Do not pressure wash the pedestal.
Mise en garde:
• NE PAS utiliser de solvants tels qu'un diluant ou du benzène.
• Ne pas utiliser un lavage sous pression pour nettoyer le piédestal.
Maintenance
Page 81
Advertisement
Table of Contents
