Pedestal; Figure 20 Pedestal Base Installation - Gasboy Islander Prime Instruction And Installation Manual

5.3 Installing the Pedestal Base

5.3.5 Pedestal

To install the pedestal, proceed as follows:
Remove the four M10 nuts from the four bolts attached to the bottom plate 
1
(step 2 in
Figure 20: Pedestal Base Installation
2 Remove the front panel of the pedestal base to enable you to reach the bolts inside.
3 Install the pedestal base on top of the bottom plate (step 4 in
4 Anchor the pedestal base onto the base plate with the four bolts protruding from the inner
ground.
Secure the pedestal base to the base plate with four M10 flat washers and M10 nuts 
5
(step 5 in
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Figure 20).
Figure 20).
Installation
Figure 20).
Page 41