Table of Contents
Advertisement
System Overview
3.4.2 Automatic Vehicle Identification
The following options are available for automatic vehicle identification in Islander Prime:
• Fuel Point PLUS: The software license embedded in the OrPAY1000 is a vehicle
• No vehicle identification unit: The vehicle identification process will be done manually by
3.4.3 Dispensers
Islander Prime can support either mechanical or electronic dispensers, in accordance with its
configuration.
Mechanical dispensers require the installation of an MPI-C interface blade. Electronic
dispensers (Tokheim
relevant interface blades.
3.4.4 Barcode Reader Option
The pedestal can be supplied with an optional barcode reader (P/N M15778B009) for reading
barcodes.
3.4.5 Insert Card Reader Option
The pedestal is designed to support an optional standard insert card reader (P/N M15778B007)
tointerface with magnetic cards, such as loyalty and fuel cards.
3.4.6 HID Option
The pedestal is designed to support an optional HID Reader (P/N M09680B134) set for
payment with HID cards.
3.4.7 Cellular Modem Option
The pedestal is designed to support an optional AvaLAN
modem for remote access communication.
3.4.8 Receipt Printer Option
The pedestal is designed to support the G2 Panel Printer (P/N M15778B008). The printer
issues a printout of transactions to the driver.
Page 16
identification process performed in a wireless mode. The software receives DataPass
and/or Fuel Ring data, decrypts their information and transmits it to the nOrCU in a secure
manner over an RF signal. This setup enables the RF signal to travel through various
routes and bypass possible interferences (such as large trucks).
the driver with any accepted authorization devices such as cards, tags, or manual data
entry.
, Current Loop, RS-485, RS-422, RS-232) require installation of
®
™
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
3.4 Available Configurations
(model: AW-NetdropLTE) cellular
Advertisement
Table of Contents
