Figure 27 Hid Reader Back Plate; Figure 28 Hid Reader On Back Plate - Gasboy Islander Prime Instruction And Installation Manual

Installation
To install an HID Reader in the Islander Prime, proceed as follows:
1 Remove the screws affixing the HID Bracket to the Islander Prime pole door.
Remove the back plate from the HID Reader.
2
Fasten the HID Reader back plate to the HID Bracket using the flat head screws provided in
3
the installation kit as follows (see
Figure 27: HID Reader Back Plate
Pull the HID connector harness cable through the HID bracket, and mount the HID Reader to
4
the bracket as follows (see
Figure 28: HID Reader on Back Plate
Page 46
Figure 27).
Figure 28).
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
5.4 Installing Options