Figure 33 Insertion Card Reader Label; Figure 34 Insertion Card Reader Mounted In Islander Prime - Gasboy Islander Prime Instruction And Installation Manual

5.4 Installing Options
Figure 33: Insertion Card Reader Label
To install an insertion card reader in the Islander Prime, proceed as follows:
1 Remove the screws affixing the front panel to the Islander Prime pole.
2 Place the insertion card reader into the opening light stripe side up.
3 Use the screws provided in the installation kit to secure the insertion card reader to the Islander
Prime pole door.
Connect the insertion card reader cable from the OrPAY1000 to the socket on the insertion
4
card reader device (see
Figure 34: Insertion Card Reader Mounted in Islander Prime
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Figure 34).
Installation
Page 49