Table of Contents
Advertisement
3.7 Technical Specifications and Standards
3.7 Technical Specifications and Standards
The following details the technical specifications, as well as the communication and security
standards for the Islander Prime.
3.7.1 Islander Prime Technical Specifications
The following details the physical, electrical, and environmental specifications of the Islander
Prime (see
Table 2: Islander Prime Technical Specifications
Parameter
Dimensions (H x W x D)
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
Humidity
Communication Interface
Pump Communication Interface
Wireless Communication
Pump Control Maximum Current
(4 Solid State Relay Channels)
Power supply output voltage to Pulser
unit
Power Supply Maximum Output
Current
Pulser Input High level Voltage
Pulser Input Low level sink current
(@15V)
In use "On" level (Input)
In use "Off" level (Input)
Certifications
Optional Accessories
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Table
2):
Value
Standard: 158 x 30 x 29 cm | 62.2-inch x 11.8-inch x 29.2-inch in.
ADA accessible: 128 x 30 x 29 cm | 50-inch x 11.8-inch x 29.2-inch.
100 - 240 VAC
2A max
Without Printer: -40° to +65°C | -40° to +149°F
With Printer: -40° to +50°C | -40° to +122°F
With Barcorde: -30° to +60°C | -22° to +140°F
-40° to +70°C | -40° to +158°F
80% Non-condensing
• RS-485
• RS-232
• RS-422
• LAN
• RS-485
• RS-422
• Current Loop
• MPI-C
• Tokheim
Optional wireless communication IEEE802.15.4 with proprietary mesh
network (License)
Maximum of 380mA current for each channel, either for driving the external
relay of the pump motor or for driving the solenoid valve
12 VDC +/- 20% 50mA
8 A max
9 to 15 VDC
3mA max.
100 – 240 VAC, 50/60 Hz, 5mA
0 to 10 VAC
ETL, CE, FCC, cETLus
• Printer
• EMV Card Reader and Payment
• Insert Card Reader
• HID Card Reader
• Barcode Reader
• ADA (Americans with Disabilities Act) Pedestal
• Stainless Steel Pedestal
System Overview
Page 19
Advertisement
Table of Contents
