Table of Contents
Advertisement
Installation
To install a barcode reader in the Islander Prime, proceed as follows:
1
Remove the opaque panel covering the glass window in the Islander Prime pole door.
Place the barcode reader inside the pole door lined up against the glass window in the door of
2
the Islander Prime pole (see
Figure 23: Barcode Reader in Islander Prime Pole Door
Use the screws provided in the installation kit to secure the barcode reader to the Islander
3
Prime.
4
Connect barcode harness P1 to the socket in the barcode reader.
5
Remove the power harness from the OrPAY1000, and wire the barcode reader harness P2 to
the respective pins 7 and 8 in the OrPAY1000 power harness as follows (see
Figure 24: Barcode Reader Wiring to OrPAY1000
Page 44
Figure
23):
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
5.4 Installing Options
Figure
24).
Advertisement
Table of Contents
