Islander Prime Setup - Gasboy Islander Prime Instruction And Installation Manual

Installation
• Clean dirt and wire remnants
In case problems are detected after installation or during operation, repeat the post-installation
checks listed above.
CAUTION

5.7 Islander Prime Setup

For information on how to set up Islander Prime once installed, refer to the MDE-4817
SiteOmat Installation and Maintenance Manual.
Page 68
Antenna wire:
o
330 feet (100 m) for VIU
>
50 feet (15 m) for Fuel Ring
>
The OrPAY1000 display should not be exposed to direct sunlight. It is therefore
highly recommended to add an awning.
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
5.7 Islander Prime Setup