Connection Diagram; Power Supply Setup; Figure 14 Power Equipment Connections; Figure 15 Power Supply Components - Gasboy Islander Prime Instruction And Installation Manual

4.6 Power Setup

4.6.1 Connection Diagram

The following diagram shows the requested connections of the power equipment 
(see
Figure 14: Power Equipment Connections
Apart from the power equipment, other components should be connected to the power supply
such as the TLG and dispensers.

4.6.2 Power Supply Setup

The Islander Prime power supply can be connected 110 VAC - 220 VAC. The mains cable is
first connected to the terminal block. Between the terminal block and power supply, the
system uses a line filter in order to attenuate conducted radio frequencies - RFI,
Electromagnetic Interference (EMI) - between the line and the equipment (see
Figure 15: Power Supply Components
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Figure 14):
Preliminary Guidelines
Figure 15).
Page 33