System Maintenance Commands; Description - Gasboy SERIES 1000 Operation Manual

Section 5

SYSTEM MAINTENANCE COMMANDS

DESCRIPTION

The commands in this section allow you to load or change your system configuration and enter or
display values for various system options.
If you followed the sequence outlined in Getting Started, you have already (with the help of your
ASR) performed the initial loading of these commands. If you haven't, do so now.
The following section describes each of the system configuration parameters.
additional options on your Series 1000, see the chapters on those options for additional
parameters to the system configuration process.
The commands in this section are:
SC load or change your system configuration
PS print your system configuration parameters
LD load the current date and time
PD print the current date and time
SD load the time for system shutdown and restart
PR print the program's revision level and date
LK load PIN key
LC print last cards read
MO display one screen at a time
05/29/03
If you have
5-1