INVT SPC Series Operation Manual page 26

SPC Series Solar Pump Inverter
Function
code
P00.15
P00.18
Name
Note:


2: Disable reverse running. It can be
used in some special scenarios where
reverse running is disallowed.
0: No operation
1: Rotary autotuning
Comprehensive
autotuning. It is recommended to use
rotating autotuning when high control
Motor
accuracy is needed.
parameter
2: Static autotuning 1
autotuning
Used in scenarios where the motor
cannot be disconnected from load.
3: Static autotuning 2
Empty-load
inductance are not autotuned.
0: No operation
1: Restore default values
2: Clear fault records
Note:
Function

parameter
restore

Description
When the parameter is restored to
the default value,
running direction is restored to the
default one. Exercise caution before
using this function if the change of
motor rotation
disallowed after commissioning.
Do not change the setting of the
parameter because reverse running
is not allowed in water pump
application scenarios.
motor
current
After the selected operation is
performed, the function code is
automatically restored to 0.
Restoring the default values may
delete the user password. Exercise
caution before using this function.
-22-
Function parameter list
Default Modify
the motor's
direction is
parameter
and mutual
◎
0
◎
0