INVT SPC Series Operation Manual page 28

SPC Series Solar Pump Inverter
Function
code
Rated speed of
P02.03
Rated voltage
P02.04
Rated current
P02.05
P02.06 resistance of
P02.07 resistance of
P02.08
inductance of AM
P02.09 inductance of
Name
1–36000rpm
AM
0–1200V
of AM
0.8–6000.0A
of AM
Stator
0.001–65.535Ω
AM
Rotor
0.001–65.535Ω
AM
Leakage
0.1–6553.5mH
Mutual
0.1–6553.5mH
AM
Description
the parameter
autotuning function.
Whether parameter
autotuning can be
performed properly
depends on the settings
of the motor nameplate
parameters.
In addition, you need to
configure a motor
according to the
standard motor
configuration of the
inverter. If the power of
the motor is greatly
different from that of the
standard motor
configuration, the
control performance of
the inverter degrades
significantly.
Note: Resetting the
rated power of the
motor (P02.01) can
initialize the parameters
P02.02–P02.10.
After motor parameter
autotuning is properly
performed, the values
of P02.06–P02.10
automatically updated.
These parameters are
the benchmark
parameters for
high-performance
vector control, directly
affecting the control
-24-
Function parameter list
Default Modify
Model
depended
Model
depended
Model
depended
Model
depended
are
Model
depended
Model
depended
Model
depended
◎
◎
◎
○
○
○
○